Hackaday Podcast

This week, it was Kristina's turn in the hot seat with Editor-in-Chief Elliot Williams. First up in the news: Germany's solar expansion and a lot of wind have resulted in excess energy, which some people think is bad. In Hackaday news, the entries in the 2024 Business Card Challenge are really stacking up.

Then it's on to What's That Sound, which Kristina provided this week and managed to stump Elliot. Can you get it? Can you figure it out? Can you guess what's making that sound? If you can, and your number comes up, you get a special Hackaday Podcast t-shirt.

Then it's on to the hacks, beginning with an improved spectrometer that wasn't easy, and a rotary phone kitchen timer that kind of was. We'll talk about badges turned invitations, reinventing rotary switches, and dynamic button blobs. Finally, we get the lowdown on the state of nuclear fusion, and posit why chatting online isn't what it used to be.

Check out the links at Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!

With Elliot off on vacation, Tom and Dan made a valiant effort to avoid the dreaded "clip show" and provide you with the tastiest hacker treats of the week. Did they succeed? That's not for us to say, but if you're interested in things like non-emulated N64 games and unnecessarily cool filament sensors, this just might be one to check out.

We also came across a noise suppressor for a leaf blower, giant antennae dangling from government helicopters, and a desktop-friendly wire EDM setup that just might change the face of machining. We waxed on about the difference between AI-generated code and just pulling routines from StackExchange, came to the conclusion that single-stage-to-orbit is basically just science fiction, and took a look at the latest eclipse from 80,000 feet, albeit a month after the fact.

What did Hackaday Editors Elliot Williams and Al Williams find interesting on Hackaday this week? Well, honestly, all the posts, but they had to pick some to share with you in the podcast below. There's news about SuperCon 2024, and failing insulin pumps. After a mystery sound, the guys jump into reverbing garden hoses, Z80s, and even ribbon cable repair.

Adaptive tech was big this week, with a braille reader for smartphones and an assistive knife handle. The quick hacks ranged from a typewriter that writes on toast to a professional-looking but homemade ham radio transceiver.

Check out the links if you want to follow along, and as always, tell us what you think about this episode in the comments!

Join Hackaday Editors Elliot Williams and Tom Nardi as they get excited over the pocket-sized possibilities of the recently announced 2024 Business Card Challenge, and once again discuss their picks for the most interesting stories and hacks from the last week. There's cheap microcontrollers in highly parallel applications, a library that can easily unlock the world of Bluetooth input devices in your next project, some gorgeous custom flight simulator buttons that would class up any front panel, and an incredible behind the scenes look at how a New Space company designs a rocket engine from the ground up.

Stick around to hear about the latest 3D printed gadget that all the cool kids are fidgeting around with, a brain-computer interface development board for the Arduino, and a WWII-era lesson on how NOT to use hand tools. Finally, learn how veteran Hackaday writer Dan Maloney might have inadvertently kicked off a community effort to digitize rare documentation for NASA's Voyager spacecraft.

Check out the links on Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!

This week, it was Kristina's turn in the hot seat with Editor-in-Chief Elliot Williams. First up in the news -- the results are in for the 2024 Home Sweet Home Automation contest! First and second place went to some really gnarly, well-documented hacks, and third went to the cutest pill-dispensing robot you'll probably see before you hit the retirement home. Which was your favorite? Let us know in the comments.

Then it's on to What's That Sound. Kristina failed once again, but you will probably fare differently. Can you get it? Can you figure it out? Can you guess what's making that sound? If you can, and your number comes up, you get a special Hackaday Podcast t-shirt.

Then it's on to the hacks, beginning with a DIY cell phone sniffer and a pen that changed the world. Then we talk bullet time on a budget, the beautiful marriage of 3D printing and LEGO, and, oh yes, flexure whegs. Finally, we get the lowdown on extender probes, and posit why it's hard to set up time zones on the Moon, relatively speaking.

Check out the links over at Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!

Elliot and Dan got together to enshrine the week's hacks in podcast form, and to commiserate about their respective moms, each of whom recently fell victim to phishing attacks. It's not easy being ad hoc tech support sometimes, and as Elliot says, when someone is on the phone telling you that you've been hacked, he's the hacker. Moving on to the hacks, we took a look at a hacking roadmap for a cheap ham radio, felt the burn of AM broadcasts, and learned how to program old-school EPROMs on the cheap.

We talked about why having a smart TV in your house might not be so smart, especially for Windows users, and were properly shocked by just how bad wireless charging really is. Also, cheap wind turbines turn out to be terrible, barnacles might give a clue to the whereabouts of MH370, and infosec can really make use of cheap microcontrollers.

What were some of the best posts on Hackaday last week? Elliot Williams and Al Williams decided there were too many to choose from, but they did take a sampling of the ones that caught their attention. This week's picks were an eclectic mix of everything from metal casting and plasma cutters to radio astronomy and space telescope budgets. In between? Some basic circuit design, 3D printing, games, dogs, and software tools. Sound confusing? It won't be after you listen to this week's podcast.

Check out the links on Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!

Before Elliot Williams jumps on a train for Hackaday Europe, there was just enough time to meet up virtually with Tom Nardi to discuss their favorite hacks and stories from the previous week. This episode's topics include the potential benefits of having a dual-gantry 3D printer, using microcontrollers to build bespoke note taking gadgets, the exciting world of rock tumbling, and the proper care and maintenance required to keep your World War II battleship in shape.

They'll also go over some old school keyboard technologies, DIP chip repairs, and documenting celestial events with your home solar array. By the end you'll hear about the real-world challenges of putting artificial intelligence to work, and how you can safely put high-power lithium batteries to work in your projects without setting your house on fire.

Check out the links over on Hackaday if you want to follow along, and as always, tell us what you think in the comments!

This week, Editor-in-Chief Elliot Williams and Kristina Panos convened once again to give the lowdown on this week's best hacks. First up in the news -- it's giga-sunset time for Gigaset IoT devices, which simultaneously became paperweights on March 29th. And all that Flipper Zero panic? It has spread to Australia, but still remains exactly that: panic.

Then it's on to What's That Sound. Kristina failed again, although she was in the right neighborhood. Can you get it? Can you figure it out? Can you guess what's making that sound? If you can, and your number comes up, you get a special Hackaday Podcast t-shirt.

Then it's on to the hacks, beginning with the terrifying news of an xz backdoor. From there, we marvel at a 1980s 'butler in a box' -- a voice-activated home automation system -- and at the idea of LoRa transmissions without a radio. Finally, we discuss why you don't want to piss off Trekkies, and whether AI has any place in tech support.

Check out the links on Hackaday to follow along, and as always, tell us what you think about this episode in the comments!

It was Dan's turn behind the mic with Elliot this time as we uncovered the latest from the world of hacking, and what an eclectic mix it was. It was slightly heavy on machining, with a look at mini-mills that are better than nothing, and a DIY DRO that's A-OK. We also kicked the nostalgia bucket over -- whatever that means -- and got a new twist on the old "65-in-1" concept, found hidden code in 80s music, and looked at color TV in the US and how it got that way. We've got ample alliteration about grep, thoughts about telling time on the Moon, and what does Canada have against the poor Flipper Zero, anyway?

Head on over to Hackaday for all the linky-links.