It looks like this podcast has ended some time ago. This means that no new episodes have been added some time ago. If you're the host of this podcast, you can check whether your RSS file is reachable for podcast clients.
Art and Technology Podcast
by www.digitalsculpting.netThe art and technology podcast bridges the gap between the traditional studio and digital technologies. It offers a generous helping of innovation and a smidgen of science, all combined by very creative people. Artists, researchers, resources, inventors, and some topics that are extreme and unusual are discussed. Further topic discussions on each topic can be found on the forums at digitalsculpting.net
Episodes
Art and Tech_004 3D Printing in Color with Eric Van Straaten
49m · PublishedEric Van Straatenhas been printing his fine art pieces in color for a few years now. Pushing the limitations of the medium Eric shares some tips and tricks of 3D printing in color.
__________
You are welcome to use this podcast on your website. For further information and possible images associated with this podcast visit the podcast page ofDigitalSculpting.net
For more information and more podcasts visitDigitalSculpting.net
Join the conversation on 3D technology in fine art and craft on bothFacebookandLinkedIn.
Find"3D Technology in Fine Art and Craft: Exploring 3D Printing, Scanning, Sculpting and Milling"on Amazon.
Follow the podcast host on twitter.
Some of these podcasts are made into enhanced podcasts with images and can be found onyoutube.
Art and Tech_004 3D Printing in Color with Eric Van Straaten
49m · PublishedEric Van Straatenhas been printing his fine art pieces in color for a few years now. Pushing the limitations of the medium Eric shares some tips and tricks of 3D printing in color.
__________
You are welcome to use this podcast on your website. For further information and possible images associated with this podcast visit the podcast page ofDigitalSculpting.net
For more information and more podcasts visitDigitalSculpting.net
Join the conversation on 3D technology in fine art and craft on bothFacebookandLinkedIn.
Find"3D Technology in Fine Art and Craft: Exploring 3D Printing, Scanning, Sculpting and Milling"on Amazon.
Follow the podcast host on twitter.
Some of these podcasts are made into enhanced podcasts with images and can be found onyoutube.
Art and Tech_003 3D Printing and Investment Casting
30m · Published3D printing and investment casting. Haseeb Ahmed talks about 3D printing, fine art, STEAM and investment casting with Author and podcast host Bridgette Mongeon. Haseeb's work is featured in Mongeon's book 3D Technology in Fine Art and Craft: Exploration
__________
You are welcome to use this podcast on your website. For further information and possible images associated with this podcast visit the podcast page ofDigitalSculpting.net
For more information and more podcasts visitDigitalSculpting.net
Join the conversation on 3D technology in fine art and craft on bothFacebookandLinkedIn.
Find"3D Technology in Fine Art and Craft: Exploring 3D Printing, Scanning, Sculpting and Milling"on Amazon.
Follow the podcast host on twitter.
Some of these podcasts are made into enhanced podcasts with images and can be found onyoutube.
Art and Tech_002 Joshua Harker
41m · PublishedArtist Joshua Harker and sculptor/author Bridgette Mongeon talk about the changes in technology and how it relates to fine art. Joshua shares his process, vendors and software, as well as hisstory about using Kickstarter.
Joshua is a featured artist in Bridgette Mongeon'sbook 3D Technology in Fine Art and Craft: Exploration of 3D Printing, Sculpting, Scanning and Milling.
THIS PODCAST WAS MADE INTO AN ENHANCED PODCAST AND CAN BE FOUND ON YOU TUBE.
__________
You are welcome to use this podcast on your website. For further information and possible images associated with this podcast visit the podcast page ofDigitalSculpting.net
For more information and more podcasts visitDigitalSculpting.net
Join the conversation on 3D technology in fine art and craft on bothFacebookandLinkedIn.
Find"3D Technology in Fine Art and Craft: Exploring 3D Printing, Scanning, Sculpting and Milling"on Amazon.
Follow the podcast host on twitter.
Some of these podcasts are made into enhanced podcasts with images and can be found onyoutube.
Art and Tech_001 Interview - 3D Printer World & Bridgette Mongeon
35m · PublishedThe Art and Technology podcasts return with fervor. 3D Printer World's editor at large- Robert Titsch turns the tables on podcast host Bridgette Mongeon as he interviews her about her new book "3D Technology in Fine Art and Craft" and the resurgence of podcasts. Learn about 3D printing, CNC Milling, 3D Scanning and more.
THIS PODCAST HAS BEEN MADE INTO AN ENHANCED PODCAST WITH IMAGES. ITCAN BE FOUND ON YOU TUBE.
_______
You are welcome to use this podcast on your website. For further information and possible images associated with this podcast visit the podcast page ofDigitalSculpting.net
For more information and more podcasts visitDigitalSculpting.net
Join the conversation on 3D technology in fine art and craft on bothFacebookandLinkedIn.
Find"3D Technology in Fine Art and Craft: Exploring 3D Printing, Scanning, Sculpting and Milling"on Amazon.
Follow the podcast host on twitter.
Some of these podcasts are made into enhanced podcasts with images and can be found onyoutube.
Art_Technology_007_Interview_with_Oron_Catts_a_Discussion_About_Living_Art..mp3
36m · PublishedIn this podcast the interviewer Bridgette Mongeon and Oron Catts discuss the artwork Victimless Leather, Living tissue that is grown in a laboratory that resembles skin.
This is a very charged topic. Introduction to the art and SymbioticA may cause some to gasp. Some of the interviewers questions were first raised in the article Frankensteinian Art?
_______________
You are welcome to use this podcast on your website. For further information and possible images associated with this podcast visit the podcast page ofDigitalSculpting.net
For more information and more podcasts visitDigitalSculpting.net
Join the conversation on 3D technology in fine art and craft on bothFacebookandLinkedIn.
Find"3D Technology in Fine Art and Craft: Exploring 3D Printing, Scanning, Sculpting and Milling"on Amazon.
Follow the podcast host on twitter.
Some of these podcasts are made into enhanced podcasts with images and can be found onyoutube.
Art and Technology 006- Digital Scanning and Milling
32m · Published-
Art and Technology 0006
An Interview with Dan Gustafson Next Engine Scanner and Traditional Sculptor Mark Byrd
Dan Gustafson- Marketing Director at NextEngine-3d Scanners
LISTEN NOW from your browser
Using digital technology such as scanning and milling in the traditional art studio is what I refer to as Tra-digi art. Dan Gustafson of the NextEngine Scanner and Traditional Sculptor Mark Byrd spend time with me talking about using the NextEngine scanner in the creating of life size traditional bronze sculptures. What are the advantages of using the scanner? What are the pitfalls to watch out for when incorporating this technology in your own studio?
Some of these concepts of digital scanning and printing were featured in chapter 7 of the Mudbox book.* Listen to the podcast from our podcast player on the nav bar at Digital Sculpting.net
* The forum for this topic. You may add your comments and thoughts
* The direct link to this podcast segment- should you want to put it on your website or blog http://media.libsyn.com/media/artandtechnology/Art_Technology_006_Scanning_and_Milling_in_the_Tradtitional_Studio.mp3More photographs to come
The Art and Technology Podcast listen from the Digital Sculpting.net website or Subscribe to the podcast in itunes
The processes and pof 3d scanning are featured in chapter 7 of the Mudbox book.
_______________
You are welcome to use this podcast on your website. For further information and possible images associated with this podcast visit the podcast page ofDigitalSculpting.net
For more information and more podcasts visitDigitalSculpting.net
Join the conversation on 3D technology in fine art and craft on bothFacebookandLinkedIn.
Find"3D Technology in Fine Art and Craft: Exploring 3D Printing, Scanning, Sculpting and Milling"on Amazon.
Follow the podcast host on twitter.
Some of these podcasts are made into enhanced podcasts with images and can be found onyoutube.
Art and Technology 006- Digital Scanning and Milling
32m · Published-
Art and Technology 0006
An Interview with Dan Gustafson Next Engine Scanner and Traditional Sculptor Mark Byrd
Dan Gustafson- Marketing Director at NextEngine-3d Scanners
LISTEN NOW from your browser
Using digital technology such as scanning and milling in the traditional art studio is what I refer to as Tra-digi art. Dan Gustafson of the NextEngine Scanner and Traditional Sculptor Mark Byrd spend time with me talking about using the NextEngine scanner in the creating of life size traditional bronze sculptures. What are the advantages of using the scanner? What are the pitfalls to watch out for when incorporating this technology in your own studio?
Some of these concepts of digital scanning and printing were featured in chapter 7 of the Mudbox book.* Listen to the podcast from our podcast player on the nav bar at Digital Sculpting.net
* The forum for this topic. You may add your comments and thoughts
* The direct link to this podcast segment- should you want to put it on your website or blog http://media.libsyn.com/media/artandtechnology/Art_Technology_006_Scanning_and_Milling_in_the_Tradtitional_Studio.mp3More photographs to come
The Art and Technology Podcast listen from the Digital Sculpting.net website or Subscribe to the podcast in itunes
The processes and pof 3d scanning are featured in chapter 7 of the Mudbox book.
_______________
You are welcome to use this podcast on your website. For further information and possible images associated with this podcast visit the podcast page ofDigitalSculpting.net
For more information and more podcasts visitDigitalSculpting.net
Join the conversation on 3D technology in fine art and craft on bothFacebookandLinkedIn.
Find"3D Technology in Fine Art and Craft: Exploring 3D Printing, Scanning, Sculpting and Milling"on Amazon.
Follow the podcast host on twitter.
Some of these podcasts are made into enhanced podcasts with images and can be found onyoutube.
Art and Technology -An interview with Paul Effinger- Foundry of the Future
29m · Published- Paul Effinger is a digital sculptor who is exploring different methods of bronze casting other than the lost wax method of bronze casting. He is exploring z corp printing in a cellulose powder, infiltrates and others.
Effinger worked 13 years in the gaming industry creating for published titles as lead Character Artists and Animator and contributed to many others as an independent contractor. He strives to see some of his creations into physical forms and loves the feel of bronze. This has caused him to explore in different areas of 3d printing and investment casting. The processes and pitfalls of 3d printing are featured in chapter 7 of the Mudbox book.
* Listen to the podcast from our podcast player on the nav bar at Digital Sculpting.net * The forum for this topic. You may add your comments and thoughts * The direct link to this podcast segment- should you want to put it on your website or blog
http://media.libsyn.com/media/artandtechnology/Art_technology_005_Interview_with_Paul_Effinger.mp3
_______________
You are welcome to use this podcast on your website. For further information and possible images associated with this podcast visit the podcast page ofDigitalSculpting.net
For more information and more podcasts visitDigitalSculpting.net
Join the conversation on 3D technology in fine art and craft on bothFacebookandLinkedIn.
Find"3D Technology in Fine Art and Craft: Exploring 3D Printing, Scanning, Sculpting and Milling"on Amazon.
Follow the podcast host on twitter.
Some of these podcasts are made into enhanced podcasts with images and can be found onyoutube.
Art and Technology Podcast
“A fire side chat where innovation, creativity, technology and science meet.”
Art and Technology -An interview with Paul Effinger- Foundry of the Future
29m · Published- Paul Effinger is a digital sculptor who is exploring different methods of bronze casting other than the lost wax method of bronze casting. He is exploring z corp printing in a cellulose powder, infiltrates and others.
Effinger worked 13 years in the gaming industry creating for published titles as lead Character Artists and Animator and contributed to many others as an independent contractor. He strives to see some of his creations into physical forms and loves the feel of bronze. This has caused him to explore in different areas of 3d printing and investment casting. The processes and pitfalls of 3d printing are featured in chapter 7 of the Mudbox book.
* Listen to the podcast from our podcast player on the nav bar at Digital Sculpting.net * The forum for this topic. You may add your comments and thoughts * The direct link to this podcast segment- should you want to put it on your website or blog
http://media.libsyn.com/media/artandtechnology/Art_technology_005_Interview_with_Paul_Effinger.mp3
_______________
You are welcome to use this podcast on your website. For further information and possible images associated with this podcast visit the podcast page ofDigitalSculpting.net
For more information and more podcasts visitDigitalSculpting.net
Join the conversation on 3D technology in fine art and craft on bothFacebookandLinkedIn.
Find"3D Technology in Fine Art and Craft: Exploring 3D Printing, Scanning, Sculpting and Milling"on Amazon.
Follow the podcast host on twitter.
Some of these podcasts are made into enhanced podcasts with images and can be found onyoutube.
Art and Technology Podcast
“A fire side chat where innovation, creativity, technology and science meet.”
Art and Technology Podcast has 28 episodes in total of non- explicit content. Total playtime is 16:51:02. The language of the podcast is English. This podcast has been added on July 28th 2022. It might contain more episodes than the ones shown here. It was last updated on March 25th, 2024 01:17.
